← Blog
Blog·5 min read·Cepaos

Winery automation: Cepaos Connected Winery vs dedicated control systems (Acrolon TankNet, VinWizard)

An honest comparison between dedicated winery automation systems (Acrolon TankNet, VinWizard) and Cepaos Connected Winery: what each does best, what they cost, and when to choose which.

If you are evaluating winery automation, you will run into two very different product families: dedicated control systems (Acrolon TankNet, VinWizard) and software layers that sit on top of your existing equipment, which is the category of Cepaos Connected Winery. They do not compete on everything — and picking the wrong one is expensive. Here is the honest comparison.


What dedicated systems do (very well)

Let's be clear up front: Acrolon and VinWizard build hardware and process control for wineries. Acrolon says it has worked on fermentation control since 2000 (acrolon.com) and VinWizard cites 20+ years of winery automation (vinwizard.com), both read on 2026-11-16.

  • Acrolon TankNET: tank temperature and fermentation control with per-tank controllers, valves, fermentation profiles and alarms.
  • VinWizard offers plant control: temperature, agitation, refrigeration management with energy optimization, zone panels.

Both sell their own hardware with their own control software. That is their model: you install their controllers, their valves, their panels, and you get a closed, reliable control loop built for process.

If your problem is "I need precision temperature control across 200 tanks with refrigeration energy optimization", a dedicated system is a serious answer and probably the right one.

Where a dedicated system stops

The limit shows up when you step back from the control loop and look at the whole winery operation:

  1. It is an island. The dedicated system knows "tank 12 is at 14 °C" and "the pump started at 14:30". It does not know which wine is in tank 12, which batch it belongs to, or that the transfer had to be booked in the cellar records. The record for the winemaker and the regulator still gets written by hand, in another system.
  2. Proprietary hardware. The value is tied to installing their controllers. If your press, chiller and bottling line already have their own PLCs, replacing or duplicating that control means engineering, wiring and capital.
  3. Partial equipment coverage. They specialize in tanks and refrigeration. The bench scale, the labeler, the weather station and vineyard irrigation stay outside the system.

What Cepaos Connected Winery does differently

Connected Winery starts from the opposite assumption: your equipment already knows how to work; what is missing is a connection to your management system.

  • It reads what every machine does (when it starts, how much it processed) through whatever the machine already offers: the manufacturer's API, Modbus/OPC-UA against the existing PLC, or a minimal relay + flow-meter retrofit. Five integration tiers (A-E), down to manual logging: no machine stays out of the book.
  • It commands operations — start the line, stop a pump, and (in validation) pump X litres with flow-meter cut-off or change the chiller setpoint — with two-person safety: approval from another authorized person or QR-verified physical presence, and the plant emergency stop always overriding any remote command. The real status of each protocol is in the technology partners catalogue.
  • The machine and the cellar book in the same app. Every command is logged with who sent it, who approved it and how the machine responded, and bottling-line events are reconciled with the batch when the bottling run is confirmed. A pump transfer is booked in the cellar book as a batch movement, with the actual litres measured by the flow meter.

The cost model is different too: it is a software layer on the hardware you already own, with a monthly add-on instead of a project with proprietary hardware, installation and commissioning. We do not sell you new controllers for machines that already have their own.

Head to head

Dedicated systems (Acrolon / VinWizard)Cepaos Connected Winery
Fine process control (ramps, PID)⭐ Excellent, their specialtyDelegated to the existing PLC/controller
HardwareTheir own, proprietaryYours; minimal retrofit if needed
Equipment coverageMostly tanks and refrigeration16 types, from bench scale to irrigation
Cellar book / compliance recordsNot verifiedIn the same app; bottling is reconciled with the batch
Record of every commandLocal control loopWho sent it, who approved it and how the machine responded
Command safetyLocal control loopSecond-person approval or on-site QR; the emergency stop always wins
Typical project costCapital + installationMonthly software add-on

When to choose which

Choose a dedicated system if: your bottleneck is process control itself — hundreds of tanks without temperature control, fine fermentation profiles, refrigeration energy optimization. There, dedicated hardware pays for itself.

Choose Connected Winery if: your equipment already works and the problem is that operations live in silos — records are written by hand, nobody knows which batch each pump moved, and you want to command and record without replacing anything. It is also the natural next step if you already run read-only IoT monitoring and want to move up to commanding.

Both? It happens, and it works: the dedicated system runs tank refrigeration, and Cepaos keeps everything else in the cellar records. They are not mutually exclusive.


Keep reading

Get winery management tips and news

I want to receive the newsletter and commercial updates from cepaos LLC (1021 E Lincolnway, Ste 10026, Cheyenne, WY 82001, USA; hello@cepaos.com) by email. I will confirm the subscription from the email I receive and can unsubscribe at any time.