LE

Hardware · Cellar

Letina

Not supported yet

Markets: All markets

Not supported yet: it cannot be connected from Cepaos today. You can request it and we will let you know if that changes.

What can be connected

  • Other equipment

    Entire range

    Connection: Retrofit

    Protocol: Modbus TCP (retrofit)

    Not supported yet

What data reaches Cepaos

  • Real-time equipment readings

What you need

  • Domaine plan or higher (IoT telemetry)
  • A Cepaos Gateway (Raspberry Pi 4 or mini-PC) on the winery network
  • An electrical integrator to install the sensor and relay

How to connect it, step by step

This integration cannot be connected yet: the guide describes how it could work. Request it with the form and we will let you know if that changes.

Retrofit

External sensor and relay with Modbus output, read by the Gateway.

  1. 1

    With an electrical integrator, install an external sensor (pressure, flow or temperature, depending on the equipment) and, if you want commands, a relay; both with Modbus TCP output.

  2. 2

    Connect a Cepaos Gateway in IoT & Automation → Gateway and follow the install command.

  3. 3

    Add the equipment in IoT & Automation → Connected equipment and set up the Modbus TCP adapter with the registers of the installed sensor and relay.

  4. 4

    Check the readings in “View live” before using them in your records.

Open this screen in Cepaos

You need a Cepaos account with the administrator role.

Why a retrofit instead of a direct connection?

Because the manufacturer does not publish a communication interface. A retrofit measures from the outside with standard sensors, without touching the equipment’s control system.

Request the Letina integration

Tell us about your case. We review the equipment or account and get back to you with next steps.

Required field

Selected integration

Letina