ME

Hardware · Reception · Cellar

Mettler-Toledo

Implemented, not yet field-verified

Compatible technical integration. It does not imply a commercial agreement with Mettler-Toledo.

Markets: All markets

What can be connected

  • Bench scale (additives)

    MT-SICS

    Connection: USB / serial in the browser

    Protocol: RS-232 / USB (MT-SICS)

    Implemented, not yet field-verified
  • Bench scale (additives)

    IND

    Connection: USB / serial in the browser

    Protocol: RS-232 / USB

    Implemented, not yet field-verified
  • Bench scale (additives)

    IND570 (placa EtherNet/IP + Modbus TCP)

    Connection: Cepaos Gateway

    Protocol: Modbus TCP

    Implemented, not yet field-verified

What data reaches Cepaos

  • Stable weight straight into the form

What you need

  • Chrome or Edge on a desktop computer

How to connect it, step by step

USB / serial in the browser

It plugs into the computer and Cepaos reads the value from Chrome or Edge.

  1. 1

    Connect the scale to the computer via USB or with an RS-232-to-USB adapter.

  2. 2

    Open Cepaos in desktop Chrome or Edge (Safari and iOS devices do not support Web Serial).

  3. 3

    In Grape Reception → New reception, use the scale panel, choose the protocol (RS-232 / USB (MT-SICS) / RS-232 / USB) and authorise the port.

  4. 4

    Capture the gross weight and tare once the reading shows as stable. If the scale does not respond, you can enter the weight by hand.

Open this screen in Cepaos

You need a Cepaos account with the administrator role.

Do I need to install anything?

No. The reading happens in the browser; you only need the cable and, for a serial scale, a USB adapter.

Cepaos Gateway

A mini-PC on your network reads the equipment over an industrial protocol.

  1. 1

    In Cepaos, go to IoT & Automation → Gateway and tap “Connect gateway”. You get an install command with a one-time token valid for 24 hours. If it expires, you lose it or reinstall the Raspberry Pi, generate a new one from the gateway page.

  2. 2

    Prepare a Raspberry Pi 4 (or a mini-PC) with 64-bit Raspberry Pi OS Lite or Ubuntu Server 22.04+, wired to the winery network and with internet access. Paste the command: it installs the agent as a service in about 2 minutes.

  3. 3

    Once the gateway shows as online, add the equipment in IoT & Automation → Connected equipment → New equipment and choose the Modbus TCP protocol.

  4. 4

    On the equipment page, fill in the adapter configuration from the manufacturer’s manual (IP, Modbus registers, NodeIds or tags) and, if you will send commands, what each command writes and with which scale. Cepaos validates every field before saving and never invents registers.

  5. 5

    Tap “Read from the equipment now” on the equipment page: the gateway reads every value on the spot and shows what the equipment answered or why it failed. Then open “View live” to follow the readings.

Open this screen in Cepaos

You need a Cepaos account with the administrator role.

Does the Gateway keep working if the internet goes down?

The agent runs inside the winery: it keeps reading the equipment and stores the events until the connection is back.

Request the Mettler-Toledo integration

Tell us about your case. We review the equipment or account and get back to you with next steps.

Required field

Selected integration

Mettler-Toledo