Free · No signup · No ads

Harvest yield and tank capacity planner

Estimate how many litres of wine your harvest will make (area × yield or total tonnage) and how many tanks and barrels you need, with a fill plan and an L/hL/gal and kg/q/t converter.

Who it is for
Winemakers and cellar masters getting ready for harvest.
What it answers
How many litres the harvest will yield and how many tanks and barrels are needed to take it in.

Default values are typical, editable estimates — not standards. Adjust them with your winery's own figures.

1 · Harvest yield

Calculates automatically

Typical estimate: red ≈ 72, white ≈ 65, rosé ≈ 62. It varies with variety, ripeness, press cycle and how much press wine you keep.

Typical, editable estimate (≈ 3 %): lees and rackings until the wine is clean.

Total grapes

80,000 kg

Wine after pressing

57,600 L

Losses

1,728 L

Estimated clean wine

55,872 L

2 · Tank and barrel capacity

Switching stage applies typical headspace: fermentation 20 % in tanks and 15 % in barrels; storage 2 % in tanks and 0 % in barrels. You can edit each row.

Vessel inventory

Results

Volume to house

57,600 L

Usable capacity

39,650 L

Nominal capacity

49,000 L

Shortfall

17,950 L

Occupancy by vessel type

  • Wine
  • Headspace
  • Free
  • 4 × Tank 10,000 L32,000 L / 40,000 L · 80 %

    Using only this type: 8 units

  • 40 × Barrel 225 L7,650 L / 9,000 L · 85 %

    Using only this type: 302 units

Suggested fill plan

The largest vessels are filled first; the remainder goes into the smallest vessel that can hold all of it, to keep ullage to a minimum.

  1. 4 × Tank 10,000 L → 8,000 L each(filled to usable volume)
  2. 40 × Barrel 225 L → 191 L each(filled to usable volume)
  3. No vessel assigned: 17,950 L

3 · Unit converter

  • 10 hL
  • 264.172 US gal

Indicative estimate for harvest planning. It does not replace the calibration of your vessels or your official declarations.

Get this result by email

We'll send you the values you used and the result, with a link back to the calculator. You don't need it to see the result: it's already above.

We only use your email to send this result and log your request. We won't subscribe you to anything unless you tick the box. Privacy policy

Frequently asked questions

How many litres of wine do 100 kg of grapes make?
As a typical estimate, 60 to 75 L depending on style: a red fermented on skins yields more (≈ 72 L) than a pressed white (≈ 65 L) or a direct-press rosé (≈ 62 L). The real figure depends on variety, ripeness, press cycle and whether you blend back the press wine — that's why the field is editable.
Why leave headspace in fermentation tanks?
During fermentation the cap and foam rise, so winemakers usually leave a free margin; in storage, vessels are kept nearly full to limit air contact. The tool's percentages are typical estimates you can adjust to your own practice.
Which barrel sizes can I add?
The common formats: 225 L (Bordeaux), 228 L (Burgundy), 300 L and 500 L. For any other size, add a tank row with its nominal volume.

Cepaos is the all-in-one winery management software: vineyard, cellar, traceability and compliance.

Selling at your cellar door? See the Cepaos POS