Cepaos ecosystem

Everything that connects to Cepaos

Cellar equipment, vineyard sensors, accounting software, banks and tax authorities. Search by process stage, protocol or market and see how each one connects.

brands and platforms
92
connectable today
56
connectors
102

Cepaos Gateway protocols

For equipment without an internet connection, the Cepaos Gateway (a Raspberry Pi or mini-PC on the winery network) translates industrial protocols into Cepaos events.

ProtocolStatusTypical use
Modbus TCPIn validation with real hardwareFlow meters, chillers, boilers and sensors over Ethernet.
MQTTIn validation with real hardwareSensors and gateways that publish to a broker.
HTTPS (REST)In validation with real hardwareEquipment with its own REST interface that sends straight to Cepaos.
Modbus RTU (RS-485)In validation with real hardwarePump drives and devices on an RS-485 serial bus.
OPC UAIn validation with real hardwareIndustrial PLCs (Siemens, Rockwell, Schneider).
Siemens S7In validation with real hardwareSiemens S7 PLCs (CIP stations, lines).
EtherNet/IPPlannedAllen-Bradley / Rockwell PLCs.
RS-232PlannedLab instruments and scales on a serial port.

How a connection works

  1. 1

    Pick the equipment or platform

    Each profile says what data comes in, over which protocol and what you need before you start.

  2. 2

    Follow the step-by-step guide

    Guides point to the exact Cepaos screen where it is set up, with your own credentials.

  3. 3

    The data reaches your winery

    Readings, counts and movements are linked to your lots, vessels and blocks, with full traceability.

Frequently asked questions

What do the statuses mean?

Done, activate with your account or key: the connector is already in Cepaos and you activate it yourself. In validation with real hardware: the equipment speaks a standard protocol Cepaos supports, but it still has to be validated with that model in a winery; you need the manufacturer's manual. Planned: there is a profile or partial development in Cepaos, but it cannot be activated yet.

Are the brands in the catalog official Cepaos partners?

No, unless the profile says so. The catalog lists technical integrations. If you are a manufacturer and want to be listed as an official partner, use the “Become a partner” form.

Do I need a specific plan or add-on?

Equipment and sensor telemetry requires a plan with IoT; sending commands to equipment (for example, starting a pump) requires the Connected Winery add-on. Accounting, banking and tax integrations depend on the market and the plan; each profile says so.

Who enters the credentials?

You do. Cepaos connects with your own accounts, API keys or certificates (bring your own credentials). We never issue or operate on anyone else’s behalf.

My equipment is not listed. What should I do?

Request the integration with the form on this page. We review the equipment’s protocol and tell you whether it can connect through the Gateway or what would be needed.

What about equipment without a network connection?

With a retrofit (an external sensor and, if needed, a relay with Modbus output) it can still be measured. If not, Cepaos lets you enter readings by hand from the equipment record.

Can’t find your equipment or software?

Tell us what you need to connect. We assess the protocol and get back to you with next steps.

Required field

Do you make equipment or software for wine?

Add your solution to the catalog: growers and winemakers who use Cepaos reach your website from your profile.

Apply to become a partner